Frequently asked questions:
Q: How do I remove the Selfie Stick -It®?
A: You simply "twist" (turn to the right/clockwise) to remove. Do not pull, simply twist to easily remove.
Q: To what surfaces will the Selfie Stick-It stick?
A: Almost any sealed/ painted surface such as painted Gyprock®, stained or varnished wood, painted smooth concrete, glass, ceramic tile and stainless steel.
Q: How long will the Selfie Stick-It hold to a surface?
A: The length of time varies depending on the surface and temperature. For these reasons only use for a temporary hold, time enough to capture a photo or short video. No longer than 5 minutes in most cases. Our technicians have tested the Pet Selfie Stick It in many environments and have reported hours of holding power but to be cautious remove from vertical surface within a few minutes. For a more permanent hold the Selfie Stick It has a tab at the top to accept 3M Command strip hook #17006 available wherever 3M stips are sold. Create photo booth stations around your house this way, hang your phone for hours or days and use as a surveillance camera, for example.
If you are unsure of the surface, test the hold first without your phone attached. Make sure to clean the Selfie Stick It gel surface after each use.
Q: Can I use Selfie Stick-It on freshly painted surfaces?
A: Paint should be fully cured. Check paint can for manufacturer's cure time. It is recommended to wait at least 30 days after painting before applying Selfie Stick-It. Note that poorly prepared painted surfaces such as poor undercoat, trapped dust, grease and mould could result in the peeling of the painted surface. Always "twist" the Quik Pod Twist a quarter turn to remove, remember to never pull.
Q: How do I clean the Selfie Stick-It?
The simplest way is to rinse with water. Add soap if necessary or use Isopropyl alcohol to clean the surface, available from pharmacies or local hardware stores. Convenient individual Isopropyl wipes are available at Walgreens and CVS,
Q: Is it reusable?
A: Yes, it can be used thousands of times with proper cleaning and care.
Climate and Temperature
Q: Can I use Selfie Stick-It in hot climates?
A: The adhesive could soften and lose adhesion with temperatures above 40°C.
Q: What about using Selfie Stick-It in cold climates?
A: You can, but it should should be applied to a clean, smooth surface when the temperature is above 10°C.
Q: How does the Selfie Stick -It attach to a bike or stroller?
A: An optional, adjustable lanyard secures the Selfie Stick-It to the handle bar. Great for bike share programs, an instant mount on any bike or stroller. There are other useful accessories available too, a car mount kit and tripod mount adapter. Visit www.SelfieStickIt.com to see the entire line of accessories.
Q: How long will my Selfie Stick-It last?
Selfie Stick-It is reusable and washable. Please see instructions on how to clean. It can be used over and over again.